Members Boats
- GCB069
- Petty Officer
- Posts: 72
- Joined: Mon May 28, 2007 9:40 pm
- Location: Edwall,WA ( 40 miles west of Spokane off SR 2)
Members Boats
Just wanted to see what all you member used for to go fishing??
Mine is a homemade pontoon put my 2006 Mercury 9.9 hp Outboard converted to 15HP on it.
Mine is a homemade pontoon put my 2006 Mercury 9.9 hp Outboard converted to 15HP on it.
- Attachments
-
- pontoon_350X262.jpg (42.41 KiB) Viewed 13301 times
Last edited by GCB069 on Wed Mar 13, 2013 1:35 pm, edited 4 times in total.
- bob johansen
- Commander
- Posts: 500
- Joined: Sun Apr 01, 2007 8:16 am
- Location: Port Orchard, WA
RE:Members Boats
Everybody should have more than one boat. I had three for years (including my old canoe). I have been fishing from an old Bass Tracker that I bought new in 1985. It has been all over this beautiful state and seen a lot of nice bass, perch, sockeye and others come over the gunnels since that time.
- Attachments
-
- Bass_Tracker_1.jpg (214.09 KiB) Viewed 11334 times
A nice bass is too valuable a resource to enjoy catching only once.
Fishing adds years to your life and life to your years - Homer Circle
Fishing adds years to your life and life to your years - Homer Circle
RE:Members Boats
14 ft. Hewescraft River Runner w/40HP Mariner,Minnkota(40# thrust) bow and (50# thrust)transom mount motor; fiberglass drift boat(need some work done to it),and 2 pontoons.
Last edited by Anonymous on Tue Sep 11, 2007 10:31 pm, edited 1 time in total.
-
- Warrant Officer
- Posts: 112
- Joined: Mon Apr 30, 2007 9:48 am
- Location: Rathdrum Idaho
RE:Members Boats
I seen this post and had to make a reply and it's realy embarrasing, Anyway here goes. I had bought a Stratos FS289 fish and ski bass boat in 1989 then ended up losing it in a bankrupcy. :pale: Then in 1993 was able to get into a Basstracker 1700 then lost that to my x-wife in 2000.."whaaaa" Now I have a 12' G3 jon boat with a 5 horse on it, also a coleman RamX Basshunter 9', plus nummerous rubber rafts and a fishing tube. Don't get me wrong I have prob. caught more fish out of the smaller boats but I miss having the room to store things and also move around.
RE:Members Boats
I have a 16' Scanoe. No, that is not a typo, it is a Scanoe, it is like a canoe, but it has a flat stern so that I can put a 5hp motor on it. I was looking at a Fishing Skeeter pontoon boat, but I wanted to be able to take my son out with me. In fact I took him out this week end and what a good time we had. I tried to include a picture, I can not seem to make the image feature work. I lived in Northern California for about 10 years, moved back home to Washington about 10 years ago, when I was there I had a 12' double-hulled home-made fiberglass jon boat...sure wish I had that still!
***Hey I figured out how to add an image...OK, that is not my canoe. That is a rendering of the boat I am working on. I draw for Christensen Shipyards. I would be happy to have one of the tenders from this boat!!
***Hey I figured out how to add an image...OK, that is not my canoe. That is a rendering of the boat I am working on. I draw for Christensen Shipyards. I would be happy to have one of the tenders from this boat!!
- Attachments
-
- Hull_035_Rendering.jpg (28.79 KiB) Viewed 13094 times
Last edited by Anonymous on Thu Sep 13, 2007 10:19 am, edited 1 time in total.
One fish at a time...
Lewis
What are you fishing for?
What am I fishing for?
Lewis
What are you fishing for?
What am I fishing for?
RE:Members Boats
I have a 14' Tracker jon boat with a 2hp Suzuki and a 40#MinnKota. Next spring I plan to buy a trailer and increase my motor to a 2-stroke Mercury with 8hp or 9.9hp. It's a stable platform for fishing as I regularly stand on the bench seats and steer the trolling motor with my foot on the tiller. I holds more gear than I will ever use, but always bring along. The middle seat has a hatch that opens up to a non-aerated livewell which is handy for panfish or other take home fish, but usually I plug it and use it for a cooler.
I have an old 12' vee-hull that I leave at my brother-in-laws shed in Southern Oregon for use when I go to Selmac Lake or other lakes down around Grants Pass. It needs a bunch of work that I haven't gotten around to because it's four hours away. Out of sight. Out of mind.
I have an old 12' vee-hull that I leave at my brother-in-laws shed in Southern Oregon for use when I go to Selmac Lake or other lakes down around Grants Pass. It needs a bunch of work that I haven't gotten around to because it's four hours away. Out of sight. Out of mind.
RE:Members Boats
I have a Basshound 10.2 and absolutly love it. You can't really ask more out of a little boat for small lake fishing. Check it out, http://www.directboats.com/basstender102.html Like I said, I couldn't ask for anything more out of a small lake boat. My next boat will be a 16-17' Grizzley Tracker, mostly for duck hunting though. I will most deffinately hang onto the Basshound after I get the Grizzley thuogh. I also own a river rated Water Skeeter pontoon boat which I have floated the upper Sauk River from the Whitechuck down to Darrington fishing for Dollies. Both my brother and I almost got seriously injured on this trip, not even joking. Please, only extremely experienced oarsman/whitewater rafters atempt this stretch. We are very experienced, and it was still extremely difficult.
RE:Members Boats
i have a smokercraft promag 140. it has a small casting deck, bow mount trolling motor, rod locker, storage under the bow casting deck, & 25hp mercury. i replaced the old seat base on the deck so i could put on a stand/lean seat.
overall i like the boat, but it does get pushed around pretty easy when it's windy. i'd like something better (aka. bigger) for tournament fishing but that's not really an option at this point.
overall i like the boat, but it does get pushed around pretty easy when it's windy. i'd like something better (aka. bigger) for tournament fishing but that's not really an option at this point.
- skeeter bassin
- Lieutenant
- Posts: 214
- Joined: Sat Apr 28, 2007 7:32 am
- Location: Bonney Lake
RE:Members Boats
Heres mine
- Attachments
-
- skeeter_photo.jpg (57.67 KiB) Viewed 13088 times
When you think you know it all, its time to quit. Knowledge should be gained on every trip.
-
- Warrant Officer
- Posts: 112
- Joined: Mon Apr 30, 2007 9:48 am
- Location: Rathdrum Idaho
RE:Members Boats
Sorry skeeter bassin i just gotta =p~ , if there was a smiley for crying I'd have that on on here instead. :thumleft:
RE:Members Boats
Skeeterbassin, I'm envious! It will be about three years before I make that jump so I can go back to fishing tournaments. Right now most of my time and resources are going into building my business. Thanks for the pic it helps keep my eye on the prize!
Last edited by Anonymous on Thu Sep 13, 2007 8:27 am, edited 1 time in total.
- Easy Limits
- Lieutenant
- Posts: 272
- Joined: Thu Apr 05, 2007 9:12 pm
- Location: Nisqually
RE:Members Boats
Here's mine with me in it.
RE:Members Boats
Mine is a 19ft Alumaweld Stryker with a 50hp Suzuki outboard,for little lakes I have a Sevylor Fish Hunter with a Minn Kota 38 pound of thrust trolling,and finally the old trusty float tube powered by me.
Last edited by Anonymous on Thu Sep 13, 2007 10:20 am, edited 1 time in total.
"All that is necessary for evil to triumph is for good men to do nothing."Edmund Burke
http://s295.photobucket.com/albums/mm15 ... %20Season/
http://s295.photobucket.com/albums/mm15 ... %20Season/
RE:Members Boats
My boat is a much repaired 12' gamefisher I bought from my neighbor for $25.00. Then my son wouldn't come fishin' (to load and unload) any more so I had to find a trailer.
Craig's list 12' gamefisher and trailer I got for $175.00. I'm gonna use the $25.00 boat until it is worn completely and fix up the less repaired boat that came with the trailer.
So I have 2 boats.
I am going to try to attach pictures.
Craig's list 12' gamefisher and trailer I got for $175.00. I'm gonna use the $25.00 boat until it is worn completely and fix up the less repaired boat that came with the trailer.
So I have 2 boats.
I am going to try to attach pictures.
- Attachments
-
- resize_boat_2.jpg (128.42 KiB) Viewed 12975 times
-
- resize_boat_1.jpg (100.5 KiB) Viewed 12993 times
Look for Wannafish A Lure on FaceBook
He said, “Throw your net on the right side of the boat and you will find some.” When they did, they were unable to haul the net in because of the large number of fish.
He said, “Throw your net on the right side of the boat and you will find some.” When they did, they were unable to haul the net in because of the large number of fish.
RE:Members Boats
How fast does that go with the 25hp? I'm looking at getting either a 15hp or 25hp to replace my old merc 9.8.CK14 wrote:i have a smokercraft promag 140. it has a small casting deck, bow mount trolling motor, rod locker, storage under the bow casting deck, & 25hp mercury. i replaced the old seat base on the deck so i could put on a stand/lean seat.
I have an old Gregor H-34, I'll try and find a photo of it, I think I have one from when we took it to Banks several years ago.
- Attachments
-
- boat_2.JPG (162.59 KiB) Viewed 12820 times
-
- boat_1.JPG (190.87 KiB) Viewed 12856 times
Last edited by Anonymous on Thu Sep 27, 2007 8:15 am, edited 1 time in total.
"I got my swim trunks, And my flippie-floppies
I'm flipping Jigs, you at Kinko's straight flipping copies"
I'm flipping Jigs, you at Kinko's straight flipping copies"
RE:Members Boats
I Have a 1996 Nitro 884 Savage Black, Red and Silver. If you ever see me come ove and say hello.
I do not have a pic of it yet but i will take one and post it.
I do not have a pic of it yet but i will take one and post it.
- Gisteppo
- Commodore
- Posts: 1016
- Joined: Fri Jun 22, 2007 11:26 am
- Location: Lake Spokane (Long)
- Contact:
RE:Members Boats
Mine is still under construction, 22' picnic launch:
Also starting a 16' wood Pacific City style dory in the next week or two.
E
Also starting a 16' wood Pacific City style dory in the next week or two.
E
- beresford13861
- Warrant Officer
- Posts: 155
- Joined: Mon Oct 22, 2007 6:55 pm
- Location: Riverside, CA
- Contact:
RE:Members Boats
heres mine, 1985 Skeeter, with 150HP, done 58mph and its fuuuun.
- 2000subaru
- Commander
- Posts: 552
- Joined: Mon Sep 17, 2007 12:13 pm
- Location: Bonney Lake - D. South
RE:Members Boats
beresford13861 - is the storage next to the cockpit factory or was that fabricated? I'm looking at an 88 that a box was built for in the same area.
- beresford13861
- Warrant Officer
- Posts: 155
- Joined: Mon Oct 22, 2007 6:55 pm
- Location: Riverside, CA
- Contact:
RE:Members Boats
ya it was made and added. when i bought the boat i removed it, theres no need for it, now its sitting on the side of my garage. its nice to have, but i realy dont need it.2000subaru wrote:beresford13861 - is the storage next to the cockpit factory or was that fabricated? I'm looking at an 88 that a box was built for in the same area.